Snatf Xx

I have the mission courtesy of BigA from CVW-21. Gosling should have it too. Let's get an early start this week.

Agreed. Excellent. You build the brief and I will code the mission. I'll start tonight. You even have some good pics for the brief.

I am thinking about putting rail cars in the cargo ships to distinguish them from any warships.

Gos

The briefing is done and posted. The downloads section is updated and all the various forums have been announced upon. I don't have recon photo's but that's hard to do against ships... We're ready to go on my end.

OK.. are we making the 'same' error again by not telling folks what file to put the needed dl'ed skin in? I thought we agreed to specify this in order to avoid question and confusion at mission time.

What I have on my system is

P38J

P38L

P38L-Late

Do I put the skin in all 3, or one in specific? I choose P38J because that was the closest name to the dl file ..

Apologies, I had presumed all the SNATF regulars being experienced sim pilots would know. The "J" folder is the correct one Tbar.

Server is running for testing - I'd hang around the extra 20mins to chat but 0140 here!

Gos

Bolter, no need to aplogize However lets keep in mind some of the participants will just have a case of the 'doh' .. so if we tell them in advance.. it helps get the event off on time.

TAM

Servers are down when I write this .. all of them.

Gents

Server is up and has been tested by McNasty

Fault 1: Rail Cars I put in the mission I forgot to make Blue so by the time we arrived in the B25s the Jap Cruisers had destroyed their own feighters thinging they were carrying Red Rail Cars LOL

Fault 1: I made the Blue numobj=2 which meant that Red had to achieve two ground targets to succeed but only one was listed. numobj corrected to 1.

Testing contnues.

HUGE NEWS:

We should have stats this week:

http://204.11.239.94/statssnatf/index.php

McNasty is just entering to test this now and it is working...

Gos

Okay Chaps

I am convinced it is all working perfectly.

Notes for Bolter:

When you join just use the command;

to check when the mission is going to restart. Try to sync in with that for the first half - Or restart the mission using the admin command;

The second half will start automatically but may take a while to load. Ask everyone to be patient and if it fails the first time don't worry.

This way I hope the mission timing will reset as it does not seem to time corectly if you use the admin command:

Remember to run the command

first, otherwise it will ignore your admin commands.

I have asked along:

13thAF

JFC

a20

SkyKnights

Good Luck - I will NOT be there tonight - Good Luck

Gos