Page 1 of 1

Tactical Tools

Posted: Mon Oct 20, 2008 11:27 pm
by Tbar
Gtactics program, website and info can be found here:

http://www.gtactix.com/

Suggest you go right to the 'forums' as they have Tuts that immediately hit your face with some vids.

From the 'read me'
*******************************
*** GTactix ***

*** --------- ***

*** by: Josh Kuhn (VR6R) ***

*** ? 2007-2008 ***

*******************************

Quick-Start Guide

-----------------

1) Download the setup zip.

2) Run the "Setup.exe" after extracting

3) Launch from the "GTactix Launcher" shortcut in your start menu

4) No maps are included 'out of the box'. You need to download them.

4.1) Start the program and click 'Tools > Map Vault'

4.2) Pick the map pack(s) you want and click install

5) Online sessions use a single port - TCP 49300 by default

5.1) To Host, click "Host Session", enter a name and click "Start Server"

5.2) To Join, click "Join Session", enter a name & IP and click "Connect"

***Note: If you are behind a router, you will most likely need to configure port forwarding for TCP 49300, or no one will be able to connect to you!

Have any questions, comments, bugs, suggestions or other feedback? Please visit the GTactix forums:

http://www.GTactix.com/forum/

-or-

Feel free to email me directly at: VR6R@gtactix.com

Thanks and enjoy!

-VR6R

Tactical Tools

Posted: Mon Oct 20, 2008 11:55 pm
by BSS_Burton
Ditto - I'll check it, report on suitability etc, and see if there's anything else out there.

This might take a little time, so may not get this done by end of this week.... will do it asap.

B

Tactical Tools

Posted: Tue Oct 21, 2008 6:29 pm
by JoKeR
Hey Tbar this is a pretty cool program. It's FREE to!

I've already loaded a AA map pic to "My Shared"

Can't wait to try it out.

JoKeR

Tactical Tools

Posted: Fri Oct 31, 2008 12:57 pm
by JoKeR
We need to figure out how we are going to use these new tools.

JoKeR

Tactical Tools

Posted: Fri Oct 31, 2008 2:43 pm
by Tbar
LOL.. I don't have time.. to teach, but I can work with you. What you need to do is simply take a screen shot of one of the maps. Then use that as a map input within the program. File it as a template .. then copy it for each new 'scratch plan' with a 'file save as' type of thing

We need a little work time.. so we can try this .. clean up the pilot mailing list, work out how the Assassins will interact with BSS and so forth.